Alcatel-Lucent 7705 SAR Скачать руководство пользователя страница 277

Страница: 277 / 356

Event and Accounting Logs

7705 SAR OS System Management Guide

277

Syslog Commands

syslog

Syntax

[

]

syslog

syslog-id

Context

config>log

Description

This command creates the context to configure a syslog target host that is capable of receiving selected
syslog messages from the 7705 SAR.

A valid

syslog-id

must have the target syslog host address configured.

A maximum of 10 syslog IDs can be configured.

No log events are sent to a syslog target address until the

syslog-id

has been configured as the log

destination (

) in the log-id node.

Default

No syslog IDs are defined.

Parameters

syslog-id —

the syslog ID number for the syslog destination, expressed as a decimal integer

Values

1 to 10

address

Syntax

address

ip-address

no address

Context

config>log>syslog

Description

This command associates the syslog target host IP address with the syslog ID.

This parameter is mandatory. If no address is configured, syslog data cannot be forwarded to the syslog
target host.

Only one address can be associated with a

syslog-id

. If multiple addresses are entered, the last address

entered overwrites the previous address.

The same syslog target host can be used by multiple log IDs.

The

form of the command removes the syslog target host IP address.

Default

no address

Содержание 7705 SAR




































































































































































































































































































































































Результаты поиска

Содержание 7705 SAR

Отзывы:

Похожие инструкции для 7705 SAR

Бренды по названию

Популярные бренды

Alcatel-Lucent 7705 SAR, Руководство по управлению системой

Результаты поиска

Содержание 7705 SAR

Отзывы:

Похожие инструкции для 7705 SAR

Бренды по названию

Популярные бренды