Alcatel-Lucent 7450 ESS Series, Руководство по настройке, Страница: 75 / 540

IP Router Configuration
7450 ESS OS Router Configuration Guide Page 75
Configuring a Confederation
Configuring a confederation is optional. The AS and confederation topology design should be
carefully planned. Autonomous system (AS), confederation, and BGP connection and peering
parameters must be explicitly created on each participating router. Identify AS numbers,
confederation numbers, and members participating in the confederation.
Refer to the BGP section for CLI syntax and command descriptions.
Use the following CLI syntax to configure a confederation:
CLI Syntax:
config>router
confederation confed-as-num members member-as-num
The following example displays the commands to configure the confederation topology diagram
displayed in
Figure 2 on page 39 .
NOTES :
• Confederations can be preconfigured prior to configuring BGP connections and peering.
• Each confederation can have up to 15 members.
The following displays a confederation example.
A:ALA-B>config>router# info
#------------------------------------------
# IP Configuration
#------------------------------------------
interface "system"
address 10.10.10.103/32
exit
interface "to-104"
shutdown
address 10.0.0.103/24
port 1/1/1
exit
autonomous-system 100
confederation 2002 members 200 300 400
router-id 10.10.10.103
#------------------------------------------
A:ALA-B>config>router#