List of accessories - Headphone / external microphone
8AL90391ENAAed01
80 /85
6.6.6 Place or remove the battery in the telephone
Place the battery on the telephone
Before inserting the battery
module into the phone, make
sure that its lock is in the
unlocked position.
Place the battery in its
compartment.
While maintaining the battery
module in position, slip the lock
to the locked position.
Check that the battery module is
properly installed in its housing.
Remove the battery from the telephone
Slip the lock to the unlocked
position
Lift the battery module
You can then remove the battery
module
6.7 Headphone / external microphone
The side of the telephone features a 3.5 mm jack connector for headphone / external microphone. Contact
your retailer for information on the various headphone models available.
The jack is protected by a cover. Lift the cover to plug in the jack connector. The jack connector is a 3.5
mm, 4-pole jack (TRRS standards: CTIA).
Jack connector - CTIA standards
12
A Microphone
B Ground
C Audio (right)
D Audio (left)