Albrecht 4032661271259, Руководство пользователя

Страница: 91 / 176

English 91
3. Scroll to select Set CTCSS/DCS and press Pgm/E .
4. Scroll to select one of the following options:
•
Off - the scanner ignores all tones and opens squelch on
any signal
•
CTCSS - the scanner prompts the user for the
appropriate tone. Squelch will open for this channel only
if the tone matches.
•
DCS - the scanner prompts the user for the appropriate
code. Squelch will open for this channel only if the code
matches.
•
CTCSS/DCS Search - the scanner displays any
tone/code being used, but opens squelch on any signal.
•
No Tone - indicates that the channel squelch will only
open if no CTCSS/DCS is detected.
• <
Back - returns to Channel Menu.
Note: If you select Off, CTCSS/DCS Search, or No Tone, the
scanner returns to the channel menu. If you selected CTCSS
or DCS, you can then select the CTCSS tone or DCS code.
5. Scroll to select, then press Pgm/E to save and return to the
Channel menu.
Setting Channel Modulation
1. To select a channel, press Hold and then enter the channel
number.
2. Press Pgm/E to enter the Channel menu. (You can also
press Hold and scroll to the channel; press Func then
Pgm/E .)
3. Scroll to select Set Modulation and press Pgm/E .
4. Scroll to select modulation from the following options :
•
AM - the scanner uses AM modulation.
•
FM - the scanner uses FM modulation.
5. Press Pgm/E to save and return to the Channel menu.
Note: If current frequency is air band, you cannot select FM modulation.