6
3.2
Available functions
-
Change of notes and coins into 1 denomination coins/tokens, or 2 denominations at User’s choice
-
Control of accounts via display (by on-board keys)
-
Programmable via menu (by on-board keys)
-
Change of display language by external “LANGUAGE/SEL+” pushbutton, at User’s choice.
4.
Warning
-
Comply with the instructions in this manual
-
Switch power off before any maintenance operation
-
Use only within the recommended temperature/humidity range
-
Do not expose the machine (and especially the mote acceptor front plate) to direct sun light or to
incandescent light (> 3000 Lux)
-
When in precence of car exhaust gas or smoke, clean and check the components (the note acceptor in particular)
regularly and frequently.
-
Do not favour contact with dusts or chemical moisture or sprays, water or other liquids
-
Instal indoor
-
Wipe clean by a dry piece of cloth (or slightly wet with alcohol)
-
Do not use thinners or organic solvents
-
The note acceptor could reject (or get jammed by) stained notes, or worn out, wet, wrinkled, torn, dog-eared, oil-
smeared, with sticking tape or similarly affected.
-
Clean monthly the sensors of the note acceptor. Remove paper dust that has accumulated on the drive wheels, by a
clean piece of cloth or a cotton swab. Do not use alcohol nor solvents or scrapers.
5.
Installation
PAY ATTENTION: IT IS ESSENTIAL TO FASTEN THE MACHINE TO A
SOLID WALL BY USING RELIABLE EXPANSION BOLTS.
IT IS RECOMMENDED TO USE THE WALL-MOUNT SLAB (ref. AA-0147).
A, B, C, D, E, F, G, H
=
Fastening holes for
the wall slab AA-
0147
Measures in mm
!
!
