Alber viamobil eco V14, Инструкция по эксплуатации

Страница: 11 / 38

8 7
2.2 Activating Roll Operation
Your viamobil can be manually pushed without requiring the support of the motor
when in so-called „roll operation“. This feature is solely intended for inserting and
removing the viamobil underneath the wheelchair.
•
Turn the operating button [12] into „R“ (Roll) position.
•
Wait approx. 2 seconds until the brakes unlock. You will be able to hear a clicking
sound.
•
The LED status display [13] lights up permanently, the viamobil can be pushed
(without the support of the motor).
The electronics on the viamobil have determined a fault if the LED
status display blinks and is not permanently lit up. Switch off viamo-
bil and then restart.
Please observe instructions regarding this matter in chapter 7.2.
Never activate roll operation when driving on uphill or downhill slo-
pes. The wheelchair could unintentionally start moving due to care-
lessness!
For safety reasons the brakes are temporarily activated if pushing or
rolling is deemed as too fast.
12
13
!
!
!