Network Communication Connection
4200-106
17-1
Revision 3
17.
Network Communication Connection
The LAN network connector allows the UXIM to be connected to a Eithernet network. From an existing
network, connect the network cable to the LAN connector on the UXIM.
Figure 15 - Network Connection
17.1
Network Protocols Supported
There are several protocols supported by the network interface and will require specific ports to be
opened up on the network. The following lists the supported protocols that can be used:
•
TCP 502 (Modbus)
•
TCP 3002 (Application debug port)
•
TCP 9999 (Telnet setup)
•
TCP 10001 (TCP to serial pass through)
•
UDP 69 (TFTP), only to load code updates
•
UDP 161 (SNMP)
•
UDP 162 outbound (SNMP traps)
