Alber e-pilot, Руководство пользователя

Страница: 15 / 42

8 11
2.8 Safety note on locking and releasing the brakes on inclines and gradients
Whenever possible, avoid stopping on inclines and gradients.
If you have no choice but to stop on a slope, take particular care to prevent inadvertent rolling of the e-pilot and wheelchair. In these
situations, note the following safety instructions.
Brief stop
•
Use both brake levers [7a/7b] to brake the e-pilot to a standstill and then do not release the brake levers after coming to a standstill.
This way, the brakes [19] remain activated.
•
To start up again after stopping, you should slowly release the brake lever [7b] on the left of the handlebar while simultaneously turn-
ing the throttle handle [1] to start travel.
Longer stop
•
Use both brake levers [7a/7b] to brake the e-pilot to a standstill.
•
Keep one of the two brake levers [7a or 7b] applied and apply the brakes on your wheelchair.
•
Once you have applied the brakes on your wheelchair:
Lock the brake lever [7b] on the left of the handlebar, as described in chapter 2.7.
Starting up after a longer stop
•
Release the brakes on your wheelchair.
•
First pull on brake lever [7a] and then release the locking mechanism on brake lever [7b].
•
Manually apply brake lever [7b].
•
Now slowly release brake lever [7b] while simultaneously turning the throttle handle [1] to start travel.
In general, whenever you stop for a longer period of time, you should lock brake lever [7b] and apply the brakes on
your wheelchair.
This is particularly true when on inclines and gradients.
This reduces the risk of inadvertently rolling away.
If stopping for a longer period of time on a slope:
If possible, position the e-pilot and wheelchair at right angles to the incline or gradient and apply all the brakes.
If the e-pilot is no longer attached to the wheelchair, lock the brake with brake lever [7b].
3. Battery pack
Before starting up the e-pilot and before charging the battery pack, read and observe the general information and instructions and the
safety instructions and precautions in chapters 3.5.4 to 3.5.6. Failure to comply with the safety precautions and instructions may damage
the product or result in electric shock, fire and/or serious injuries. The lithium-ion battery pack contains chemical substances that may
cause hazardous reactions if the safety instructions specified here are disregarded. Alber GmbH cannot be held liable for damage caused by
non-compliance with the general information and safety instructions.
Due to the applicable transport regulations, the battery pack is only charged to a maximum of 30 percent on delivery.
You should therefore charge it fully before using it for the first time (see chapter 3.5).
i