Mounting the Equipment
4200-088
8-3
Revision 1.03
Position Bracket
Position the multi-use braket where the UXBM
and UXSM is to be mounted.
Tighten Banding
Pull banding making sure to tighten banding with
multi–use bracket in place.
8.2.
Mounting UXCM Hardware
The UXCM can accommodate two types of mounting; 19” rack mount or table top. If the rack mount
option is desired, optional brackets (included) will need to be installed. These UXCM brackets can also
be used for a table top installation allowing the unit to be tilted. This is useful if the equipment is
mounted on top of a battery cabinet and can be tilted slightly to see the status of the unit. The following
figures show illustrations of these options.
Figure 4 - Mounting Bracket - KIT-1200-375
