Albasca CCD-820 Скачать руководство пользователя страница 69

Страница: 69 / 81

Ch7. Bluetooth Configuration

BT Parameter Set Default

7.1 Scanner Mode

A>Setup SPP Master Mode

<SPP Master Mode>

Please follow the steps to setup the communication
between the scanner and cradle.
1)

The scanner must scan “SPP Master Mode”
barcode to set the scanner in master mode.

2) Scan the Bluetooth MAC address code located

on the bottom of the cradle.

3) When the Bluetooth MAC address code was

successfully scanned, scanner will sound 3 short
beeps with green LED flash once.

4) Wait approximately five seconds for completing

the connection process with up-tone.

5) If successful, blue LED of scanner will slow flash

and the cradle will be continued on.

B>Setup SPP Slave Mode

SPP Slave Mode

Please follow the below steps to setup the
communication between the scanner and Bluetooth
application device.
1)

The scanner must scan “SPP Slave Mode”
barcode, to set the scanner in slave mode.

2) When control the Bluetooth device to search the

scanner, enter pin code (default 00:00:00) to
setup comport.

3) When scanner is successful connected, the

scanner blue LED will also blink with up-tone.
Blue LED will slowly flash to finish the setup.

Содержание CCD-820


















































































Результаты поиска

Содержание CCD-820

Отзывы:

Похожие инструкции для CCD-820

Бренды по названию

Популярные бренды

Albasca CCD-820, Руководство пользователя

Результаты поиска

Содержание CCD-820

Отзывы:

Похожие инструкции для CCD-820

Бренды по названию

Популярные бренды