2
•
Attempts to repair this will invalidate the warranty.
•
Refer repairs to this CDVB5 to a qualified service
personnel only.
•
Do not disassemble this CDVB5.
•
There are dangerous-voltage parts inside that
may cause electric shock even after power is
disconnected.
•
Store your CDVB5 in a clean, dry environment.
•
Unplug the CDVB5 immediately if it gets wet, and
consult a servicing technician.
•
Always unplug the CDVB5 before cleaning it.
•
Wipe dust off the cabinet of the CDVB5 with a clean,
dry and soft cloth.
•
Do not place any objects on top of the CDVB5.
•
Avoid exposing your CDVB5 directly to sunlight or
other heat sources.
•
Put your CDVB5 in a well-ventilated area away from
high humidity.
•
Do not expose this CDVB5 to rain or moisture,
dripping or splashing.
•
For stubborn stains use a damp (not dripping) cloth.
•
Do not use any cleaning solutions on this CDVB5.
Safety Tips
If smoke, abnormal noise or odour comes out of the
CDVB5, unplug from the mains supply immediately and
contact the retailer. Never try to repair the CDVB5 on
your own. Always contact the dealer.
NOTE:
This manual contains for-reference-only graphics
and information that are subject to change without notice.
EN 060065
As per the EN 60065 norm requirements, please pay
particular attention to the following safety guidelines.
Do not obstruct the air vents with objects such as
newspapers, table cloths, curtains etc.
Allow at least 5 cm around the product to allow enough
ventilation.
Do not place the product on or near flammable objects
such as lit candles. The device may not be exposed to
dripping or splashing and no object filled with liquid, such
as vases, must be put on the device. If the mains power
supply is used as the on / off control, it must be easily
accessible.
Please respect the environment and the law : do not throw
batteries with the household rubbish ; take them back to
your retailer and dispose of them in the correct container.
Important –
Please read these instructions fully before installation
Safety Warning
Safety Warning
Safety Information
Electrical Information
This CDVB5 is fitted with a BS1363/A 13 amp plug.
If it is not suitable for your supply sockets it must be
removed and replaced with an appropriate plug. If the plug
becomes damaged and/or needs to be replaced please
follow the wiring instructions below. The plug removed
must be disposed of immediately. It must not be plugged
into a supply socket as this will be an electrical hazard.
If the fuse needs to be replaced it must be of the same
rating and ASTA approved to BS1362. If the plug is
changed, a fuse of the appropriate rating must be fitted in
the plug, adapter or at the distribution board. If the fuse in
a moulded plug is replaced, the fuse cover must be refitted
before the appliance can be used.
2-Core plug
WARNING:
Do not connect either wire to the earth
terminal.
This symbol indicates that this 2-core appliance is
Class II and does not require an earth connection.
CAUTION:
Dangerous voltages exist inside this unit. Do not
remove cover (or back). no user serviceable parts inside refer
servicing to qualified service personnel. Disconnect from
mains supply when not in use.
The wires in this mains lead are coloured in accordance with
the following wiring codes:
Blue........................................................Neutral
Brown..........................................................Live
The wires in this mains lead must be connected to the termi-
nals in the plug as follows:
Blue Wire...........................................N or Black
Brown Wire...........................................L or Red
Only a 3 Amp fuse should be fitted in the plug.
WARNING:
Under no circumstances must the live or neutral
wires be connected to the earth terminal in a 3- pin mains
plug.
E
L
N
BLUE TO
NEUTRAL
BROWN
TO LIVE
CORD
GRIP
FUSE