13
User Instructions
Configuration
Configuration
program to a PVR or VCR via the scart socket
while your out. The selected program is on BBC2 at
3.30pm and lasts for 2 hours.
1. The settings would be as follows:
Timer No
1
TImer Mode
Once
Wakeup Mode
Channel
Wakeup Channel
BBC2
Wakeup Date
11.04.2010
On Time
15:30
Duration
02:00
2. Press the
EXIT
button a number of times to
return to the TV and save the setting you just set.
You can now continue to watch the TV or press
the
STANDBY
button.
3. When the timer reaches the programmed time
the set top box will change to the chosen channel
and display it for the selected duration.
Parental Lock
Use this screen to change the default Parental lock
code of ‘
0000
’ to whatever code you wish.
1. When selected, the initial option is to enter the
existing pass code. if you have not changed it,
enter the following ‘0000’.
2. Next enter your new pass code.
3. Enter the new pass code again to ensure you
entered the correct code in the second option.
4. The new pass code has been set.
NOTE:
If you cannot remember your newly set pass
code then the default override pass code is ‘
8888
’.
Factory Default
Should you wish to restore the unit back to the
factory default settings.
1. Select
Factory Default
from the
Digital TV
menu.
2. Enter the pass code. The default is ‘
0000
’.
3. Select
YES
from the pop up options screen
asking do you want to perform the operation.
Press the
ENTER
button to initiate.
4. The display will show “
factory Default
” and
return to the Initial install screen outlined on page
5 of this manual.
5. Perform the steps on page 5 to begin the initial
setup again.
Version
If for any reason you wish to check the software
version of your unit activate this function for details.