Alaxala AX3630S, Руководство пользователя программного обеспечения

Страница: 860 / 875

40. Error Messages Displayed When Editing the Configuration
832
40.1.17 IEEE 802.1X information
Table 40-17: IEEE 802.1X error messages
Message Description
ChGr <channel group number> :
Inconsistency is found between the dot1x
port-control and the dot1x vlan
<vlan id>
enable configuration.
Per-VLAN VLAN-based static authentication is inconsistent with
port-based authentication of channel groups.
If VLAN-based authentication (static) is set for a VLAN, port-based
authentication cannot be set for channel groups that belong to the VLAN.
If port-based authentication is set for a channel group, VLAN-based
authentication (static) cannot be set for a VLAN to which the channel group
belongs.
<channel group number> : Indicates the channel group number.
<vlan id> : Indicates the VLAN ID.
ChGr <channel group number> :
Inconsistency is found between the dot1x
port-control and the switchport mode
configuration.
Port-based authentication channel groups and Layer 2 interface attributes do
not match.
If port-based authentication channel groups are used, then the only
switchport mode that can be set is
access
.
Conversely, if the
switchport mode
command is used to set a mode other
than
access
for a channel group, then port-based authentication cannot be
used.
<channel group number> : Indicates the channel group number.
ChGr <channel group number> :
Inconsistency is found between the
reauthentication and the ignore-eapol-start
configuration.
For port-based authentication of channel groups, the
ignore-eapol-start
and
reauthentication
settings must be
consistent.
If
reauthentication
is not set, then
ignore-eapol-start
cannot be
set.
Set
reauthentication
first, then set
ignore-eapol-start
.
<channel group number> : Indicates the channel group number.
ChGr <channel group number> :
Inconsistency is found between the
supplicant-detection and the
ignore-eapol-start configuration.
For port-based authentication of channel groups, the
ignore-eapol-start
and
supplicant-detection
settings must be
consistent.
If
ignore-eapol-start
is set, then
supplicant-detection
cannot be
set to
disable
.
Conversely, if
supplicant-detection
is disabled, then
ignore-eapol-start
cannot be set.
<channel group number> : Indicates the channel group number.
Inconsistency is found between IGMP
snooping and the dot1x
multiple-authentication configuration.
IGMP snooping is inconsistent with port-based authentication for which
auto
is set for new terminal detection mode.
IGMP snooping cannot be set together with port-based authentication for
which
auto
is set for new terminal detection mode.
Inconsistency is found between IGMP
snooping and the dot1x vlan
<vlan id>
supplicant-detection auto configuration.
IGMP snooping is inconsistent with the configuration of VLAN-based
authentication (static) for which
auto
is set for new terminal detection
mode.
IGMP snooping cannot be set together with VLAN-based authentication
(static) for which
auto
is set for new terminal detection mode.
<vlan id> : Indicates the VLAN ID.
Inconsistency is found between IGMP
snooping and the dot1x vlan dynamic
supplicant-detection auto configuration.
IGMP snooping is inconsistent with VLAN-based authentication (dynamic)
for which
auto
is set for new terminal detection mode.
IGMP snooping cannot be set together with VLAN-based authentication
(dynamic) for which
auto
is set for new terminal detection mode.