Alamo BUSH HOG PVB, Руководство оператора

Страница: 48 / 54

MAINTENANCE
PVB-PVS 08/20 Maintenance Section 5-2
M
A
IN
TE
N
A
N
C
E
© 2020 Alamo Group Inc.
PARTS INFORMATION
Before operating your implement, make sure it is properly lubricated and thoroughly inspected. Only a
minimum of time and effort is required to regularly lubricate and maintain this machine to provide long life and
trouble-free operation.
After the first hour of operation, check to see that all hardware is secure and tighten if necessary.
After each use, inspect the unit and replace any worn or damaged parts as well as any decals that are missing
or not readable.
Lubrication Information
Do not let excess grease collect on or around parts, particularly when operating in sandy areas. The illustration
below shows lubrication points.
Apply NGLI Grade 2 multi-purpose grease to roller bearing before each use. A few shots of grease will purge
dirt and other contaminants our of the bearings to prolong their life.
PARTS INFORMATION
Bush Hog products are designed utilizing specifically matched system components to ensure optimum
equipment performance. These parts are made and tested to Bush Hog specifications. Non-genuine "will fit"
parts do not consistently meet these specifications. The use of “will fit” parts may reduce equipment
performance, void warranties, and present a safety hazard. Use genuine Bush Hog parts for economy and
safety.
(SPBH-2)
SEE YOUR BUSH HOG DEALER