ALADDIN LIGHT LIFT KEYSWITCH Скачать руководство пользователя страница 1

Keyswitch controller Guide

©

 2012 All Rights Reserved

The following sections can be used after power has been applied to the light lift and the controller is 

plugged into the controller wire.  Turn off light switch to chandelier.

CEILING POSITION:  The light lift will automatically shut itself off at the ceiling.  The chandelier will 

only light in the CEILING POSITION.  

DOWN POSITION:  User controls the DOWN POSITION.  The DOWN POSITION is where the 

light lift is at the desired elevation for chandelier maintenance.  The light lift will automatically shut itself off 

anytime the key is released.  

turn on the controller:

1.  Insert the key into the key lock.

norMAl oPerAtion:

1.  Turn and hold the key to the 

right

 to operate the light lift 

down

.

2.  Turn and hold the key to the 

left

 to operate the light lift 

up

.

3.  Anytime the key is released the light lift will stop.

4.  Release the key once the chandelier has reached the DOWN POSITION.

5.  Allow at least two seconds between 

up

 and 

down

 commands.

6.  The light lift will automatically shut itself off at the CEILING POSITION.

turn oFF the controller:

1.  Remove the key from the key lock.

safety warnings

call Aladdin light lift immediately if the light lift operates down while turning the key to the left and 

up while turning the key to the right.  A safety hazard can occur and cause the chandelier to fall, which 
could cause death, personal injury and/or property damage.

never operate the Aladdin light lift without tension on the cable.  never remove or tamper with the 
cable safety device.  never install an Aladdin light lift that has the cable safety device removed or 
tampered with.  The cable safety device consists of the limit switch and small gauge rectangular wire.  
it is located directly in front of the winch drum.  removing or tampering with the cable safety device 
could cause the cable to become reversed wrapped on the winch and could also cause the cable to unravel 
off the winch drum and get damaged.  never install or operate an Aladdin light lift that has a frayed, 
kinked, or otherwise damaged cable.  never operate the Aladdin light lift without first removing the 
paper tape from the winch drum.  Avoiding any of these could cause the chandelier to fall, which could 
cause death, personal injury, and/or property damage.

See

 sMArt liFt controller Guide 

on flip side

Отзывы: