GB
24
CSA 36 Li
Safety instructions
3.4
Safety of persons and animals
■
Only use the appliance for the purposes for
which it is intended. Any non-intended use
can lead to injury and property damage.
■
Only switch on the appliance when there are
no persons and/or animals in the working
area.
■
Keep hands, feet and other parts of the body
away from moving appliance parts (e.g. saw
chain, blade system).
■
Appliance parts, such as engine covers and
cutting tools, can heat up considerably during
operation. Do not touch them. After switching
off, wait until the appliance has cooled.
3.5
Appliance safety
■
Only use the appliance under the following
conditions:
■
The appliance is not soiled.
■
The appliance show no signs of damage.
■
All controls function properly.
■
Keep all appliance handles dry and clean.
■
Do not overload the appliance. It is intended
for light work in the private sector. Overload
can lead to damage to the appliance.
■
Never operate the appliance with worn or de-
fective parts. Always replace defective parts
with original spare parts from the manufac-
turer. If the appliance is operated with worn
or defective parts, guarantee claims against
the manufacturer are excluded.
3.6
Electrical safety
■
To avoid short-circuits and destroying elec-
trical components:
■
Protect the appliance against humidity
and do not use it in the rain.
■
Do not spray the appliance with water.
■
Do not open the appliance.
NOTE
Heed the safety instructions for the re-
chargeable battery and for the charging
unit in the separate operating instruc-
tions.
3.7
Safety instructions for the polemounted
pruner
3.7.1
Work instructions (01)
■
During pruning, lift the polemounted pruner
(01/1) to a maximum angle of 60° (01/2). At a
steeper angle, you inevitably get into the area
where cut-off branches can fall. Always stand
outside this area.
■
Plan an escape route in advance for getting
out of the way of falling branches. This es-
cape route must be free of obstacles such as
sawn-off branches or slippery places that
could hinder getting out of the way.
■
Keep a safe distance from bystanders, anim-
als, objects or buildings, which is at least ap-
prox. 2.5x the length of the branch to be
sawn off. If that is not possible, saw the
branch off piece by piece.
■
Do not attempt to saw a branch that has a
diameter greater than the length of the chain
bar.
■
Avoid moving branches or objects becoming
caught in the saw chain. In this case, immedi-
ately switch off the polemounted pruner.
■
Remove the rechargeable battery from the
basic appliance and push the protective
cover over the saw chain for:
■
Testing, adjustment work and cleaning
work
■
Work on the guide rail and saw chain
■
Leaving the appliance
■
Transport
■
Storage
■
Maintenance and repair work
■
Danger
■
Maintain a minimum distance of 10 m to
overhead electrical lines.
Danger of kickback
If kickback occurs, the polemounted pruner is
suddenly and uncontrollably flung back towards
the operator. This situation arises in particular if
the polemounted pruner encounters foreign bod-
ies during work, or during sawing with the tip of
the polemounted pruner.
Содержание MT 36 LI
