AL-KO EASYAIR RO-01 Скачать руководство пользователя

Страница: 55 / 76

Subject to changes in line with technical progress.

Servicing and maintenance

3313737

8.4.6 Fans

WARNING

Risk of injuries due to overrun of fans.

Switch off the unit on all poles and secure it against being restarted.

Only open the inspection doors only when the fans are switched off and stationary.

Observe the delay time of the fans. Observe a waiting time of at least 3 minutes, until the

fan impellers are stationary, before opening the inspection doors.

Never brake the impellers of the fans by hand or using an object.

WARNING

Risk of cuts

There is a risk of cuts during maintenance and cleaning of the fans!

Wear personal protective equipment (cut-proof gloves)!

8.4.6.1 Maintenance

The ball bearings used are low-maintenance and designed for extended running times. They can normally be used up to

+40 °C. Maintenance is not required under normal conditions.

Check fans for dirt, damage and corrosion.

Check fan mounting and retighten all fastening screws.

Check the function of the protective devices.

8.4.6.2 Cleaning

Clean the ventilation wheel, motor and motor mounting regularly.

8.4.7 Sound absorbers

WARNING

Risk of cuts

During maintenance and cleaning of the sound attenuator splitters there is a risk of cuts!

Wear personal protective equipment (cut-proof gloves)!

8.4.7.1 Maintenance

The sound absorbers must be inspected for soiling and damage at regular intervals.

8.4.7.2 Cleaning

Sound attenuator splitters can be removed from the unit for cleaning.

Recommendation: Following extended operating intervals, clean the sound attenuator splitters using an industrial

vacuum cleaner.

Содержание EASYAIR RO-01













































































Результаты поиска

Содержание EASYAIR RO-01

Отзывы:

Похожие инструкции для EASYAIR RO-01

Бренды по названию

Популярные бренды

AL-KO EASYAIR RO-01, Инструкция по установке и эксплуатации

Результаты поиска

Содержание EASYAIR RO-01

Отзывы:

Похожие инструкции для EASYAIR RO-01

Бренды по названию

Популярные бренды