AL-KO EASYAIR RO-01, Инструкция по установке и эксплуатации

Страница: 40 / 76

Installation and Operating Manual (translation)
40
AL-KO EASYAIR
®
„
Set the time, date, average and low air performance, and program the weekly schedule.
„
Commissioning of the electric heating register (option):
IMPORTANT
Electric heating register (option)
Check safety chain: Test the function of the flow monitor and temperature monitor and adjust
these if necessary. This is the only way to ensure safe operation of the air handling unit!
6.4.1 Damper adjustings actuators
4
5
2
3
1
1 Direction of rotation switch Changeover Change direction of rotation
2 Pushbutton and LED display green Off No electrical power supply or malfunction
Glowing green Operation
Green glowing In address mode: Pulses according to the set address (1 ... 16)
When starting: Reset to factory setting (communication)
Press the
button
In normal operation: Triggering the rotational angle adaptation
In address mode: Confirmation of the set address (1 ... 16)
3 Pushbutton and LED display yellow Off Drive is ready for operation
Yellow flashing Adaptation or synchronisation process active
Yellow flick -
ering
Communication active
Press the
button
In operation (>3 s): Switching the address mode on and off
In address mode: Setting the address by multiple actuation
When starting (>5 s): Reset to factory setting (communication)
4 Gear disengagement button Press the
button
Gear disengaged, motor stops, manual adjustment possible
Release button Gear engaged, start of synchronisation, afterwards normal opera-
tion
5 Service plug For connecting the parameterisation and service tools