Subject to changes in line with technical progress.
23
3059570
Assembly
5.4
Opening/removing the maintenance panel
WARNING
Risk of injury from falling maintenance panels.
The maintenance panels are no longer secured against falling after the clamp closures have
been opened.
Always support the maintenance panels by hand during opening/removal.
EASYAIR
®
flat units are equipped with sufficiently large maintenance panels for easy maintenance and inspection.
The operating and maintenance side is always from below.
90°
1
Fig. 6 Clamp closure on the maintenance panels
1
Screw
Step
Action
1
To open/remove the maintenance panels, loosen the screws of all clamp closures using the supplied hexagon socket
wrench (SW05).
2
Then turn the clamp closures by 90°. Always secure the maintenance panel with one hand to prevent it from falling.
5.4.1
Disassembly of the maintenance panel for individual modules
Fig. 7 Safety ropes with carabiners on the maintenance panel (overview and detail)
The small maintenance panels of the individual modules are each secured against falling down via two safety ropes and
carabiners. For complete disassembly of the maintenance panels, the carabiners can be unhooked from the fastening
lugs.
