background image

 AK-EC-04 - user manual 

/ak-ec-04

www.akyga.com

Short description of the product

The product is compatible with the applicable national and European requirements.

What is in the box?

-  AK-EC-04 electric car adapter

Storage Bag

S

ymbols 

explanation:

There is a risk of losing health or life (e.g. by electic shock).

There is a particular danger connected with service.

Important tips and information.

Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket 
placed  on  the  product  means  that  the  marked  product  can  not  be  disposed  of  with  other 
household waste. After use, the product must be return to collection point for used electical and 
electronic  equipment  or  to  the  seller.  Appropriate  segregation  of  rubbish  for  subsequent 
processing, recovery or descrution contributes to avoiding negative effects on the environment 
and health, and also allows the recovery of raw materials from which the product is made.

p. 1

The CE standard description on the product is the manufacturer's declaration that the marked 
product meets the requirements of the directive so-called The "New Approach" of the European 
Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change 
in any way. In the reason of using the adapter for other purposes than those described, the 
product  may  be  demaged. The  incorrect  use  may  also  cause  hazard  such  as  short-circuits, 
burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product 
could be share to third partie only with the user manual included.

Akyga AK-EC-04 adapter is used to convert the connectors used for charging electric vehicles. It allows 
to convert a cable with a Type 2 plug into a Type 1 plug. Thus the adapter is compatible with all models of 
devices  with  a  Type  1  socket  (J1772),  whose  permissible  power  supply  voltage  is  in  the  range 
110-250 V, 50/60 Hz.

The power consumption of charging vehicle can not exceed the power supply nominal current.

EV charger

The RoHS mark on the product is the manufacturer's declaration that the marked product meets 
the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which 
aims  to  reduce  the  amount  of  hazardous  substances  penetrating  into  the  environment  from 
electrical and electronic waste.

Ecological Solutions

GREEN

IP rating

44

IP

Fire Resistance

UL94V

-0

Strength

2T

Mechanical 

strength

10 000

Security

lock hole

Содержание AK-EC-04






Отзывы: