Akuvox IT82 Series, Руководство администратора

Страница: 24 / 72

15
IT82X
Admin Guide
2.6. Arming
Tap Arming to enter the arming interface. Arming feature is not
displayed by default. Users can ask administrator to able it. Please
refer to chapter 3.4.10.2.
IT82X monitor supports 4 modes, including “Home mode,” “Night
mode,” “Away mode” and “Disarmed mode.”
2.6.1. Arming Mode
Go to Arming - Arming mode . Users can see all of the 8 zones
and corresponding sensor types. Slide down to check more
information in this interface.
 Adjust Defence delay time . It means when users change the
arming mode from other modes, there will be 90 seconds delay
time.
 To setup the Alarm delay . It means when the sensor triggered,
there will be 90 seconds delay time to announce the notification.
 The Status in the corresponding zone means whether the zone
is available or not.
Figure 2.6 Arming
Figure 2.6.1 Arming mode