SAM
™
SMART NOZZLE N
2
P
INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
PHONE: 800.228.1161
www.akronbrass.com
Sheet: 128570
Revision 06/28/2022
Page: 14 of 34
13. TANK LEVEL INDICATION AND PERMANENT WATER SUPPLY (HYDRANT)
Tank level indication on the
SAM™ SMART NOZZLE are visible only when the
pump is engaged (pump mode).
The
SAM™ SMART NOZZLE LED display provides information on the amount of water in the tank on the
truck. This is done via wireless communication between the
SAM™ SMART NOZZLE and the SAM™ truck.
Below are the colors and levels for various tank conditions. Green is a full tank, yellow is partially filled tank,
red is a low tank and all flashing red is an extremely low tank and running out of water is imminent.
When a permanent supply of water, such as a hydrant, is established at the
SAM™ truck, the SAM™
SMART NOZZLE will automatically switch to a full blue display to indicate this condition. Below is the LED
display of the
SAM™ SMART NOZZLE after the connection to the permanent supply.
