1.- Presentation
PROCool
is the comprehensive electronic solution for managing both positive and negative refrigerated facilities.
Ÿ
Rapid start-up thanks to its quick programming menu.
Ÿ
Large format display for better viewing.
Ÿ
Hot keys for the most frequently used functions.
It has a high level of IP65 protection for installation in humid environments.
1.1.- Maintenance
Clean the surface of the unit with a soft cloth, water and detergent. Do not use abrasive detergents, petrol, white
spirits or solvents.
1.2.- Precautions
Using the equipment without following the manufacturer's instructions may affect the device's safety requirements.
To ensure that the device operates correctly, only probes supplied by AKO should be used.
Between -40 ºC and +20 ºC, if the NTC probe is extended up to 1,000 m with minimum 0.5 mm² wire, the
maximum deviation will be 0.25 ºC (Wire for probe extension ref.
AKO-15586
)
IMPORTANT:
Ÿ
The function of the digital inputs depends on the configuration (See page 21).
Ÿ
The recommended currents and powers are the maximum working currents and powers.
2.- Versions and references
*I Max. :
Maximum current allowed; the aggregated compressor and fan consumption (evap condensers)
cannot exceed this value.
** For 230 V III power supply, they must be connected exactly as shown in the installation diagram appearing in
the panel.
Evaporator
fan
Defrost
resistances
230 V-I
230 V-I
400 V-III
AKO-17635-1
3 - 25 A
400 V-III /
230 V III
2 x 1.6 A
4 A
20 A
400 V-III /
230 V III
50/60 Hz**
32 A
AKO-17635-2
Power supply
I Max.
*
Compr
esor
Condenser
fans
3
1763H532 Ed.02
