Akiyama MC-Club Скачать руководство пользователя страница 3

1

WARNINGS / AVISOS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Before Use / Security Advice

Read this manual completely before using the product.

Keep this manual in your records for future reference.

Follow all instructions printed in this manual, otherwise warranty may be 
void.

To pull the AC cord out of the wall outlet, never pull the cable itself, but only 
the AC plug.

Pull the AC plug out of the wall outlet before any kind of cleaning of this 
product. Use smooth and dry cloth only for cleaning. Check all connection 
cables before switching the unit again.

Never  use  any  accessories  or  modifications  not  authorised  by  the 
manufacturer of this unit. This can affect the security of the product and the 
manufacturer will not take any responsibility in this case.

Avoid any use near open water or high humidity to prevent the risk of electric 
shock or fire. Take also care of not placing the unit near sources of heat (e.g. 
powerful amplifiers).

Choose a location for operation where the unit is protected from vibration 
and where a fixed ground is provided. The manufacturer will not take any 
responsibility in case of damage caused by the product having fallen of the 
operation ground.

Take care of enough distance between this product and sources of hum and 
noise like electric motors and transformers.

Carry this product with great care. Punches, big forces and heavy vibration 
may damage this product mechanically.

Take always care of sufficient air convection in this product´s enviroment to 
avoid overheating, specially when mounting in a rack or in a case.

Before plugging the AC cord on the wall outlet check whether the AC mains 
voltage and frequency is the same as this product is specified for. Whenever 
your  AC  plug  should  not  match  the  wall  outlet  contact  your  dealer 
immediately.

Choose the position of the AC cord according to the lowest risk of damage by 
foot steps or by squeezing it. Take especial care of the AC cord outlet on the 
unit as well as the AC plug and wall outlet an the other end of the cable.

Pull the AC plug out of the wall outlet during thunder-storm in order to avoid 
any damage on the unit due to AC voltage peaks.

Check the total maximum power of the AC wall outlet if you connect several 
units to one wall outlet, and avoid to overload the wall outlet because this 
may bring fire.

If  fluids  have  spilled  into  the  unit  or  small  parts  have  intruded  the  unit, 
immediately switch off the unit and hand it over to servicing.

Do not open the unit for service purpose, as there are no user serviceable 
parts inside. Consequently the manufacturer will not take any responsibility 
for damage or personal injury following unauthorised service by the user. In 
addition, warranty will be void in any case of unauthorised service by the 
user or other non authorised persons.

In cause of not correct function of this unit or damaged AC cord or other 
damaged parts, pull immediately the AC plug out of the wall outlet and hand 
it over the authorised service for security check.

To meet all aspects of functionality and security during maintenance work to 
be performed on this unit, all parts should be replaced by genuine spares. 
Consequently,  take  care  of  your  dealer  or  maintenance  company  to  be 
authorised by the manufacturer.

Health advise

 

This  unit  produces  and  absorbs  electromagnetic  radiation.  The  strength  of 
radiation  and  the  sensitivity  for  disturbing  interference  meet  the  CE 
requirements. A  corresponding  is  printed  on  the  backside  of  the  unit. Any 
change  or  modification  may  affect  the  behaviour  of  the  unit  concerning 
electromagnetic radiation, with the CE requirements eventually not to be meet 
anymore. 

Estimado Cliente:

A continuación le consignamos las instrucciones del equipo. Gracias por haber 
elegido un producto Akiyama.

Antes de utilizar el equipo lea detenidamente las siguientes instrucciones:

Lea detenidamente el manual antes de utilizar su equipo.

Mantenga el manual a su disposición para su uso en el futuro.

Siga las instrucciones consignadas en el manual, un uso indebido del equipo 
podría dejar sin efecto la garantía.

Para desconectar la clavija de toma de corriente AC, nunca estire del cable. 
Hágalo estirando la clavija.

Desconecte  el  equipo  antes  de  realizar  alguna  operación  de  limpieza  al 
aparato.  Utilice  un  trapo  suave  y  seco  para  limpiar. Asegúrese  de  que  los 
cables  están  correctamente  conectados  antes  de  volver  a  poner  en 
funcionamiento el equipo.  

Nunca  utilice  accesorios  o  realice  modificaciones  no  autorizadas  por  el 
fabricante. Ello puede afectar a la integridad del equipo y el fabricante queda 
exonerado de   responsabilidad  alguna en este caso.

No utilice el equipo cerca del agua o en lugares muy húmedos para evitar 
riesgos de descarga eléctrica o fuego.  Además evite colocar el equipo cerca de 
fuentes de calor (Ej. amplificadores).

Sitúe  el  equipo  en  lugares  exentos  de  vibraciones  y  donde  una  correcta 
sujeción al piso sea posible. El fabricante queda libre de toda responsabilidad 
en caso de caída del aparato.

Sitúe el equipo a suficiente distancia de fuentes de ruido eléctrico provocado 
por motores eléctricos o transformadores.

Transporte el equipo con cuidado.  Los golpes podrían dañarlo.

Tenga  siempre  presente  que  colocar  el  aparato  en  un  lugar  sin  ventilación 
puede producir un sobre calentamiento del mismo.

Antes de conectar el equipo a la red asegúrese de que se trata del voltaje y 
frecuencia adecuado. En caso contrario absténgase de conectar el aparato y 
póngase en contacto con su distribuidor.

Elija una posición para el cable de conexión a red de forma que esté guarecido 
de pisotones y otras agresiones. Especial atención a los extremos del cable de 
conexión, es decir las clavijas de conexión a red y a la toma del propio aparato

Durante  una  tormenta  desconecte  el  equipo  de  la  red.  Posibles  descargas 
eléctricas  dañarían el aparato.

En caso de conectar varios equipos a la misma toma de la red verifique que se 
dispone  de  la  suficiente  potencia.  En  caso  de  que  la  potencia  no  fuera  la 
suficiente se produciría una sobrecarga y se podría dañar los equipos

En caso de que algún fluido o pequeñas partículas sólidas sean derramadas 
sobre el aparato y se introduzcan en éste, apáguelo y llévelo al servicio técnico 
para su verificación.

No manipule el equipo con fines a su manutención pues éste no dispone de 
piezas que lo precisen. En caso de que se manipule el interior del equipo la 
empresa queda exonerada de cualquier  responsabilidad para con el equipo y 
la persona que lo manipula. Además la garantía pierde su vigencia.

En  caso  de  que  el  aparato  no  funcione  correctamente  por  cualquier  razón 
imputable  al  equipo,  desconéctelo  de  la  red  y  llévelo  a  un  distribuidor 
autorizado para su revisión.

Durante  cualquier  manipulación  del  equipo,  para  mantener  todas  las 
cualidades del mismo tanto en prestaciones como en seguridad para el usuario 
es necesario utilizar sólo recambios originales. Asegúrese de que la empresa 
que realice el mantenimiento esté autorizada por el fabricante o distribuidor.

Aviso que atañe a su salud 

Este equipo produce y absorbe radiación electromagnética. La intensidad y la 
sensibilidad a distorsiones del exterior cumplen los criterios especificados por la 
C.E.  En la parte posterior del equipo aparece un signo indicando la adecuación a 
las normas C.E. En caso de realizarse alguna manipulación no autorizada sobre 
el   equipo podría alterarse las características del campo magnético producido   
por  el  equipo.  En  dicho  caso  el  fabricante/distribuidor  queda  exento  de  toda 
responsabilidad.

Esta  señal  indica  la  presencia  de  lugares  donde  habiendo  un  elevado 
voltaje no presentan aislamiento y por tanto constituye un claro riesgo de 
electrocución.

Esta  señal  indica  la  presencia  de  componentes  del  equipo  que  precisan  de 
mantenimiento. Para m s información sobre  stos lea el manual.

á

é

CAUTION, RISK OF ELECTRIC SHOCK, DO NOT OPEN.
ATENTION: TO REDUCE RISK OF ELECTRIC SHOCK DO NOT OPERATE INSIDE THE EQUIPMENT.
FOR MAINTENANCE CONTACT YOUR DEALER OR QUALIFIED PERSONNEL.

 

ATENCION: PARA REDUCIR EL RIESGO DE ELECTROCUCION, NO MANIPULE EL INTERIOR DEL EQUIPO. 
PARA  REALIZAR  EL  MANTENIMIENTO  DEL  EQUIPO  PONGASE  EN  CONTACTO  CON  EL  PERSONAL
QUALIFICADO

This lightning flash arrowhead is intended to alert use the presence of 
uninsulated “dangerous voltage” within the product´s enclosure that may 
be of sufficient magnitude to constitute a risk of electric shock to humans.

The exclamation point within an equilateral triangle is intended to alert user 
to the presence of important operating and maintenance instructions in the 
literature accompanying the appliance.

     mc club

Содержание MC-Club













Отзывы: