Commissioning
27 (48)
Installation manual Remotus Jupiter 10BD, Era 4/6/8B FSK16 Version: B0 Document-ID: 954045-000 EN Author: SH
7.5.4 Tandem operator operation & Multi-operator operation (Primary/Secondary)
2 transmitters and 2 receivers (one of the transmitters can only operate one crane)
In order to run tandem/multi-operator operation the receivers must be paired with two ID’s.
1. Pair transmitter 1 to receiver 1 (A). Disconnect the power source to the receiver, set the SW3 in “during
operation” and reconnect the power source to the receiver.
2. Pair transmitter 2 to receiver 2 (B). Disconnect and reconnect the power source to the receiver.
3. Pair transmitter 1 to receiver 2 (B). Disconnect the power source to the receiver, set the SW3 in “during
operation” and reconnect the power source to the receiver.
Transmitter 1
, can operate both cranes, primary transmitter for receiver 1 (A) and secondary for receiver 2 (B).
Transmitter 2
, can operate one crane, primary transmitter for receiver 2 (B).
During pairing
During operation
B
A
1
2
Receiver A
A
Transmitter 1
1
ON
1
2
3
4
SW3:1 OFF, SW3:3 OFF
ON
1
2
3
4
SW3:1 ON, SW3:3 OFF
Receiver B
B
Transmitter 2
2
ON
1
2
3
4
SW3:1 OFF, SW3:3 OFF
ON
1
2
3
4
SW3:1 ON, SW3:3 ON
Transmitter 1
1
ON
1
2
3
4
SW3:1 ON, SW3:3 OFF