English
AKASA Company notices
The information contained in this document is subject to change without notice.
All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of AKASA,
except as allowed under copyright laws.
The only warranties for AKASA products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. AKASA shall not be liable for technical or editorial
errors or omissions contained herein.
Copyright 006 AKASA ASIA Corporation.
Acknowledgements
Microsoft, Windows, Windows NT and Windows XP are registered trademarks of Microsoft Corporation.
Mac and Apple are the registered trademarks of Apple Computer, Inc.
Adobe and Acrobat are trademarks of Adobe Systems Incorporation.
Netdisk, NDAS and XIMETA are trademarks of XIMETA Incorportion.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
AKASA disclaims any and all rights in those marks.
Copyright Statement
It is a criminal offence, under applicable copyright laws, to make unauthorized copies of copyright-protected material, including computer
programs, films, broadcasts and sound recordings. This equipment should not be used for such purposes.
Notice:
The manufacture makes no warranty of any kind with regards to this material, including, but not limited to, the implied warranties
of merchantability and fitness for a particular product. The manufacture shall not be liable for errors contained herein or for incidental
consequential damages in connection with the furnishing, performance, or use of this material. Every effort has been made to ensure
that the information in this manual is accurate. The manufacture is not responsible for printing or clerical errors. Mention of third party
products is for information purposes only and constitutes neither an endorsement nor a recommendation. The manufacture assumes no
responsibility with regards to the performance of these products. This document contains proprietary information, which is protected by
copyright (see below). The information contained in this document is subject to change without notice.
Trademarks:
Microsoft is a registered trademark of Microsoft Corporation. Windows, Windows XP and the Windows 98 logo are trademarks of
Microsoft Corporation. MAC is a registered trademark of Apple Computer. NDAS® and XIMETATM are trademarks of XIMETA, Inc.All other
trademarks and product names used within this manual are the property of their respective companies and are hereby acknowledged.
Copyright:
©006 all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language or computer language, in any form, by any means, without prior written consent of manufacture.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
. This device must accept any interference received, including interference that may cause undesired operation.
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can emit radio frequency energy and, if not installed or used in accordance with the instructions, may cause
interference to radio communications. However, television reception interference can be determined by turning the equipment off and on.
The user is encouraged to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
