adhesive tape. To carry the Button on the strap: attach the strap to the Button using
the mounting hole in the main body of the Button.
Control Mode
In the Control mode, the Button has two pressing options: short and long (the
button is pressed for more than 3 seconds). These pressings can trigger the
execution of an action by one or more automation devices: Relay, WallSwitch, or
Socket.
To bind an automation device action to a long or short press of a Button:
1. Open the
and go to the Devices tab.
2. Select Button in the list of devices and go to settings by clicking the gear icon
.
3. Select the Control mode in the Button mode section.
