OG-ROI Series openGear card v1.6 31 www.aja.com
Upload Screen
To Upload New Software
1. Check the AJA website for new software for your OG-ROI Series. If new
software is found, download it and uncompress the file archive (zip).
2. Click the Upload button in the lower panel of the DashBoard Control System
to open the Upload Software Wizard.
Figure 22. OG-ROI Series Upload Software Wizard window in DashBoard
3. From the Upload Software Wizard window, select Browse.
4. Navigate to the location of the downloaded .bin file containing the software
update. Select the .bin file, then select Open. The Upload Software Wizard
window displays characteristics of the selected file for uploading.
5. Click Finish. The Uploading to Selected Devices window displays with a
progress bar.
Figure 23. OG-ROI Series Uploading to Selected Devices window in DashBoard
6. When the progress bar indicates that the uploading is finished and status
indicates “Complete,” click OK.
7. To verify the version of software or firmware currently installed on your
card, select the Card tab from the center panel of DashBoard.