OG-12GM openGear Card v1.0.2r1 4
www.aja.com
Chapter 1 – Introduction
Card Overview
The OG-12GM is a compact SDI transport openGear converter card that can solve
a wide range of UltraHD/4K equipment inter-connection problems. The product
will convert quad-link SDI signals to single-link SDI (Mux function) as well as
single-link SDI to quad-link SDI (Demux function).
The OG-12GM supports Two Sample Interleave (2SI) to Square Division (Quadrant)
and Square Division (Quadrant) to Two Sample Interleave (2SI) pixel mapping. The
OG-12GM also supports 3G-SDI Level A and Level B-DL.
The OG-12GM is configured using DashBoard by Ross Video, which also provides
detailed input and output signal diagnostic information.
Features
• openGear compatible card
• Single 12G-SDI to/from Quad 3G-SDI Level A
• Single 12G-SDI to/from Quad 3G-SDI Level B-DL
• Single 6G-SDI to/from Quad 1.5G-SDI
• Quad 3G-SDI Level A to/from Quad 3G-SDI Level B-DL
• Two Sample Interleave (2SI) to/from Square Division (Quadrant) pixel
mapping, 3G
• Pass through of Single Link 3G, 1.5G and 270M SDI video
• Distribution Amplifier support (1x4)
• Input signal diagnostics and timing analyzer for quad-link signals
• Automatic or manual control
• Detailed timing analysis for validating alignment of quad-link SDI inputs
• Passes SDI embedded audio, 24-bit, up to 16-Channels
• Recognizes and transmits High Dynamic Range (HDR) and Wide Color Gamut
(WCG) signaling on VPID
• Power: 12 watts
• Hot-swappable
• Remote Ethernet configuration through Ross DashBoard software
• Rear I/O card included