
OG-12GM openGear Card v1.0.2r1 27 www.aja.com
Figure 22. OG-12GM Uploading to Selected Devices window in DashBoard
6. When the progress bar indicates that the uploading is finished and status
indicates "Complete," click OK.
7. To verify the version of software or firmware currently installed on your
card, select the Card tab from the center panel of DashBoard.
Figure 23. OG-12GM Card Tab Screen in DashBoard indicating the currently
installed software version.
Rebooting
Rebooting is a standard function built in to the DashBoard Control System, and
should only be performed if the board has become unresponsive.
WARNING:
During a reboot, any card operations will be briefly interrupted, but will
be restored once the reboot has completed.