AJA kumo 1604 Скачать руководство пользователя страница 44

Страница: 44 / 73

KUMO SDI Routers and Control Panels v4.7r1 44 www.aja.com

Mac Startup

To run eMini-Setup on a Mac, open the Applications folder and locate the AJA

eMini-Setup application. Double-click the application to launch it.

Operating eMini-Setup

The eMini-Setup application provides a graphical user interface for viewing

settings, modifying settings, and updating firmware.

Figure 37. Example eMini-Setup Screen

Tabbed

screens

Select an

attached

AJA device

LAN connection

status

USB connection

status

Selecting an AJA device from the pull down menu on the upper right causes

eMini-Setup to connect to the selected AJA device.

Version -

The version of firmware installed in the AJA device is displayed below

the graphic.

Sn -

This is the factory set unique serial number of your AJA device. If you ever call

AJA Support for service, you may be asked for this number.

A status field at the bottom of the screen shows if the eMini-Setup application is

connected and communicating with an AJA device.

File Menu -

The File drop-down menu on the eMini-Setup application bar has a

Revert to Factory Settings menu item that allows you to change the settings

back to the AJA device’s factory defaults.

Edit Menu -

The Edit drop-down menu has standard Cut, Copy and Paste

functions for editing text.

Help Menu -

The Help drop-down menu has a link to the AJA device’s manual.

NOTE: On a Windows PC, the File, Edit and Help menus reside in the eMini-Setup

application window. On a Mac, these menus reside in the application bar above

the eMini-Setup application window.

Содержание kumo 1604










































































Результаты поиска

Содержание kumo 1604

Отзывы:

AJA kumo 1604, Инструкция по установке и эксплуатации, Страница: 44 / 73

Результаты поиска

Содержание kumo 1604

Отзывы: