AJA KONA LH, Инструкция по установке и эксплуатации

Страница: 74 / 100

66
Audio/Video
Settings Menu
The Audio/Video Settings menu in Final Cut Pro contains a series of tabbed
windows where you define the presets in specific categories such as A/V devices or in
what format media is captured. When you open the Audio/Video Settings window,
it shows a summary of the currently selected Easy Setup. Other tabbed windows are
available with greater details about each category. On the initial summary window
you can see the selected presets for the Easy Setup as well as change specific presets.
The presets you can change on the Summary window are:
Sequence Preset —select one of these as the editing timebase for new sequences. If
you make a change to Sequence Presets, the change will only take effect on any
new sequences you create—currently active sequences will not see the change.
Capture Preset —select one of these to set the incoming source format you’ll be
capturing. Ideally select the maximum quality format you’ll be using for most of
the material so there will be no need to re-render later as clips are added from
the bin to the sequence.
Device Control Preset —select the AJA Video KONA LH device (NTSC or PAL as
desired). This tells Final Cut that the KONA LH will control the VTR attached
to KONA LH or KL-Box.
A/V Devices (Audio and Video Playback)—select the KONA LH as video and
audio playback devices for Final Cut and the format to be output.
AJA KONA LH- PAL 23.98 8 bit uncompressed Use this preset when working with 625 at a 23.98 framerate. Material
will be processed as Uncompressed 8-bit.
AJA KONA LH- PAL 23.98 10 bit uncompressed Use this preset when working with 625 at a 23.98 framerate. Material
will be processed as Uncompressed 10-bit.
Easy Setup (as listed in FCP Pulldown) Description/Usage