KONA IP Transport, Capture, Display v16.0r1 52 www.aja.com
Because of the complexity of setting up IP configurations for ST 2110 operation,
IT experts at your facility may have created a set of files you can use for quick
and easy KONA IP re-configuration. A shared network location or other method
may also be established to hold these files, to ensure easy access to the correct
configuration files for various workflows.
AJA Control Panel ST 2110 Mode Follow Input Settings
The correct setting of AJA's Control Panel application's "Follow Input" parameter
is required, depending on the type of transport:
•
Follow Input
should be
On
for HD/SD SDPs.
•
Follow Input
should be
Off
for script to script configurations. The frame rate
will need to be manually set.
•
Follow Input
should be
Off
for UltraHD/4K SDP's, which will maintain the
board in UltraHD/4K operation.
AJA Device ST 2110 Mode Presets and Resets
Control Panel user defined Presets save and restore the video state and video
options currently set in Control Panel. IP parameters are not included. Use
exported scripts to save IP parameters.
The Control Panel "Reset Device" button reset clears all IP settings and puts the
card back to fresh state. This is recommended when setting up a new script or
generating a new set of parameters, but is not required.
IP Config Status Tab
The Control Panel screens available in ST 2110 mode are similar to those in ST
2022-6 mode. The IP Config screen parameters are arranged differently, however,
with three tabs.
The ST 2110 Status screen reports various network statuses, including IP
addresses and PTP operation. It also permits access to IP configuration options.
