KONA IP Transport, Capture, Display v16.0r1 39 www.aja.com
NOTE: If you want different behavior when the Capture tab is triggered; i.e. for host
system audio to be muted, then simply check the host system audio in the
Capture tab only. This way when you exit NLE Capture and return to regular
editing, the Playback tab settings will be applied and your host system audio
monitoring will resume.
IP Network Screen
The IP Network Screen lets you input the network parameters that define the
location of each physical SFP+ cage of the KONA IP hardware.
Enable 2022-7
Enables ST 2022-7 redundant network operation. See
for more information.
Local IP Address
This is the IP address that identifies each physical KONA IP SFP+ link on the
network. This field must be filled in for at least one of the KONA IP SFPs for
KONA IP to work properly.
Subnet Mask
This is the subnet mask defined by the system administrator. Generally speaking,
this value must be defined in the AJA Control Panel for KONA IP to work correctly
on the network.
Gateway Address
This is the IP address of a network gateway to a remote network. This value must
be defined if/when the KONA IP needs to send signals to, or receive signals from a
remote network.
Local MAC Address
This is an information display field that cannot be changed. It is the MAC address
that is assigned to the specific SFP cage on the KONA IP.
