AJA KONA IP Скачать руководство пользователя

Страница: 19 / 76

KONA IP Transport, Capture, Display v16.0r1 19 www.aja.com

AJA Control Panel Operating Modes

AJA Control Panel has two fundamental operating modes.

Playback Mode -

Used for playing back video files from the computer, usually

with a non-linear editing application (NLE) or AJA Control Room, through the

KONA card to that card’s video/audio outputs for viewing and/or external

recording.

Capture Mode -

Used for capturing video/audio signals that are coming into

the KONA card from an external source to create video files on the computer

using AJA Control Room or an NLE, or just for display on the KONA outputs.

This mode is also used for stand-alone video display or conversion when

Control Panel is being used without an external controlling application.

AJA Control Panel User Interface

The AJA Control Panel user interface includes a visual block diagram of the unit’s

current configuration. The current status, input and output settings, and many

other details are depicted in the color-coded block diagram. Below this block

diagram are various controls for changing operating parameters, which will vary

depending on which function screen has been selected.
The left side of the AJA Control Panel provides a navigation list of available

function screens. Clicking on a link (or alternatively, a related element in the block

diagram) displays a function screen corresponding to that topic.

NOTE: Although KONA IP is sending and receiving video over IP, once that data is

decoded to memory it is governed by the same video menus used for SDI and

HDMI based AJA I/O solutions.

Figure 6. AJA Control Panel, Block Diagram and Controls

Inputs

Framebuffer

Format

(Primary)

Outputs

Currently

Selected

Function

Screen

AJA Device

Selection

Parameter

Controls

Содержание KONA IP













































































Результаты поиска

Содержание KONA IP

Отзывы:

Похожие инструкции для KONA IP

Бренды по названию

Популярные бренды

AJA KONA IP, Инструкция по установке и эксплуатации

Результаты поиска

Содержание KONA IP

Отзывы:

Похожие инструкции для KONA IP

Бренды по названию

Популярные бренды