AJA KONA 4 Скачать руководство пользователя | Manualshive

Страница: 7 / 89

background image

KONA Capture, Display, Convert v15.2 7

www.aja.com

KONA 5 is AJA’s blazingly fast, 8-lane PCIe 3.0 I/O card, designed for today’s most

demanding video and audio workflows. Whether you are working with HFR 4K/

UltraHD, 2K/HD, SD, Deep Color and/or HDR, experience the quality and peace

of mind that KONA 5 brings to your world. Supporting 10-bit 4:2:2 and 4:4:4, or

even 12-bit* color spaces for pristine imagery, KONA 5 allows the flexibility to

ingest and output with 12G/6G/3G-SDI and monitor with a full-size HDMI 2.0

port. The bidirectional 12G-SDI ports provide immense flexibility for capture and

simultaneous pass through, and with the appropriate software, multi-channel

capture and streaming. For HDR workflows, KONA 5 supports HDR10 and HLG for

rich color delivery over HDMI 2.0.
KONA 5 supports two versions of firmware, 8K and 4K, which can be installed as

needed to meet your specific requirements.

KONA 5 Card Only

Besides shared features (see

"Shared KONA Features" on page 5

), KONA 5 offers:

•  4K and UltraHD ingest and output at frame rates up to 50/60 fps
•  4:4:4 and 4:2:2 workflows
•  12-bit color support (application dependent)
•  Four bidirectional twist-lock HD-BNC SDI 12G-SDI HD-BNCs connectors
•  One twist-lock HD-BNC reference input connector
•  Single Link I/O for 4K/UltraHD across 12G-SDI, 6G-SDI, 3G-SDI, and 1.5G-SDI (8K

Mode required for 12G signals)

•  Dual Link I/O for 1.5G-SDI and 3G-SDI (2x HD-BNC)
•  Quad Link I/O for 1.5G-SDI, 3G-SDI (4x HD-BNC)
•  Supports Quadrant or Two Sample Interleave transport
•  Automatically downsamples Single Link 4K/UltraHD 12G input to HD on the

KONA 5 SDI 4 output (4K Mode only)

• HDMI 2.0 Output
• HDR10 support - HDR Infoframe metadata, in accordance with HDMI 2.0a/CTA-

861.3

•  HLG (Hybrid Log Gamma) support
•  Up to 16 channels of SDI embedded audio
•  Up to 8 channels of HDMI embedded audio
•  Audio Monitor mixing of sources, including Host Computer and Application

(4K Mode only)

• Reference Input on card (Analog black burst or Tri-level)
• An ATX power connector (Molex p/n 45558-0003) is located at the rear of the

card, and its use is required for operation (the retail KONA 5 card does not use

PCIe bus power)

• Five short HD-BNC (locking) to full size BNC adapter cables are provided
• Extend external connectivity with included breakout cable

«
...
5
6
7
8
9
...
»

Содержание KONA 4


























































































Отзывы:

Нет отзывов

Похожие инструкции для KONA 4

Бренд: TC Electronic Страницы: 55

Бренд: Paradyne Страницы: 1

Бренд: ZALMAN Страницы: 22

Enterasys Matrix 2G4082-25

Бренд: Enterasys Страницы: 58

Бренд: Vecow Страницы: 61

iMarc SLV 9820-2M

Бренд: Paradyne Страницы: 24

Total Access 1500 Dual FXS/DPO

Бренд: ADTRAN Страницы: 2

Wisenet PRN-6400DB4

Бренд: Hanwha Techwin Страницы: 125

Cascade Express

Бренд: Riverbed Страницы: 92

Бренд: Arduino Страницы: 10

Бренд: XMOS Страницы: 10

Бренд: Alphacool Страницы: 3

Бренд: Panasonic Страницы: 78

Audio Plus 3200

Бренд: Zoltrix Страницы: 34

Бренд: Idex Страницы: 4

Бренд: Kvadrat Страницы: 9

Бренд: Linksys Страницы: 17

CCR1009-7G-1C-1S+

Бренд: MikroTik Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды