manualshive.com logo in svg

AJA Ki PRO ULTRA, Руководство по установке и эксплуатации

Поделиться
Скачать
AJA Ki PRO ULTRA Скачать руководство пользователя страница 48

Ki Pro Ultra   v1.2r1

www.aja.com

48

 

1.65 Playback Image 

Division 

This parameter is used to select between Square Division or Two Sample Interleave 
output format (4K and UHD signals only). Menu options are:

NOTE: 

For PRORES recorded files, there is no way to record image division format information (VPID 
data is not recorded).

NOTE: 

If Menu 1.6 “SDI Out” has one of the following SDI outputs selected, playback is automatically 
selected and the “Playback Image Division” parameter setting has no effect. 

• SDI  1  RGB

• SDI  1  YCbCr

1.66 HDMI Out

This parameter determines whether scaled or full raster video will be output.

NOTE: 

Full Raster output disables the Super Out feature; superimposed timecode and transport state 
is not possible with a 4K or UltraHD HDMI output.

Helpful HDMI configuration 

guidelines:

• Determine your video source format and frame rate.

• Decide whether you want a Full Raster or Scaled output.

• Determine whether your connected device can support 4096x2160 or 3840x2160.

• Remember that the Progressive Playback menu parameter needs to be configured for 

Progressive for HDMI output.

1.68 HDMI/EDID 

Override

This parameter determines whether the HDMI Output is auto-negotiated with the 
receiving device via EDID (extended display identification data) or via a specified output 
type.

These are the options:

• Auto (default) – The HDMI output is negotiated automatically with the receiving device 

via EDID

• 10-bit YCbCr – Configures the HDMI output for 10-bit YCbCr

• 8-bit RGB – Configures the HDMI output for 8-bit RGB

• 4K 4:2:0 (High FR)

NOTE: 

Typically, you will want to simply leave the selection configured for Auto so that the 
negotiation between the devices is handled automatically.

1.8 SDI Monitor Output

Sets the format of the SDI Monitor outputs. These are the options: 

Auto (default)

Square
2SI

In EtoE mode, follow the input signal image division format.
In Playback mode, follow the input signal format configuration.
Forces the output to use Square Division.
Forces the output to use Two Sample Interleave.

Crop
Crop and Scaled
Scaled (Default)
Full Raster

The HDMI output is limited to 2K or HD.
The HDMI output may produce 4K or UltraHD.

Normal (default)
Out Convert

No conversion is applied to the monitoring output
Scaled video is additionally cropped to 1080 (if the source is 

not already 1080)

Содержание Ki PRO ULTRA



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды