AJA Ki Pro GO Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 65

AJA Ki Pro GO Скачать руководство пользователя страница 25

Ki Pro GO File Based Recorder/Player v1.0 25 www.aja.com

Warning: No Video Input -

May appear if there is no video input to Ki Pro GO. No

recording will be performed in this state.

Warning: Genlock Missing -

Appears if you choose “Input” or “Ref In” for 6.1

Genlock and you attempt to play a clip and no genlock is detected on the

selected input.

Warning: Recording will end -

Appears four minutes before the Record Minutes

Max time is expired, and is a warning only.

Warning: Recording minutes max reached -

Appears when the recording has

been stopped because the time has expired. It clears the "Recording will end”

alarm.

Warning: Recording failed -

This alarm announces several failure conditions,

each indicated by an error message within the alarm.

CONFIG and MEDIA Displays

In the CONFIG and MEDIA menus, the User Control Knob scrolls through various

adjustable parameters, and pressing the knob activates menu field for scrolling

through the choices (yellow outline indicates the field is active). When entering a

menu, the system remembers and returns to the last selected parameter.

Figure 14. Example CONFIG Menu, Enable Channel

Figure 15. Example MEDIA Menu, Channel Clip Name

«
...
23
24
25
26
27
...
»

Содержание Ki Pro GO


































































Отзывы:

Нет отзывов