AJA Ki Pro GO Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 65

AJA Ki Pro GO Скачать руководство пользователя страница 16

Ki Pro GO File Based Recorder/Player v1.0 16 www.aja.com

Chapter 3 – Ki Pro GO Installation

Overview

Ki Pro GO can be used on a desktop by simply connecting power, video and audio

inputs and outputs, and inserting USB media. Front panel controls allow Ki Pro GO

configuration, and record and play functions.
Ki Pro GO also supports remote web control via Ethernet, once configured for

network operation.

What’s In The Box?

When you unpack your Ki Pro GO, you’ll find the following components:

• Ki Pro GO Recorder
• AC Adapter 110/220 with industry standard 4-pin XLR connector for powering

the Ki Pro GO. A standard North American line cord with 3-prong plug is

included.

• Handle Installation Kit

Please save all packaging for shipping the Ki Pro GO should you need to do so.

Hardware Installation

Caution! Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat

Caution! Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

Ki Pro GO Handle Installation

For units that will be moved often, AJA provides a sturdy handle.

Figure 4. Ki Pro GO with Handle Installed

«
...
14
15
16
17
18
...
»

Содержание Ki Pro GO


































































Отзывы:

Нет отзывов