AJA Ki Pro GO Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 65

AJA Ki Pro GO Скачать руководство пользователя страница 15

Ki Pro GO File Based Recorder/Player v1.0 15 www.aja.com

Unbalanced Analog Audio Monitor Outputs

Two RCA connectors provide line level analog audio output, carrying the same

signal sent to the front panel headphone output.

Ethernet Connector

An RJ-45 connector provides a 10/100/1000 Ethernet port for connecting

Ki Pro GO directly to a computer or Ethernet hub or switch for connecting to a

LAN. Ki Pro GO is compatible with CAT straight-through or cross-over Ethernet

cables, automatically detecting which is used. Once connected and properly

configured, Ki Pro GO can then be controlled by a web browser on the LAN.

Power Connector

On the back of Ki Pro GO are two standard 4-pin male XLR connectors for

supplying 12-Volt DC power to the unit. You can use either the supplied AC

Adapter or furnish your own battery source. Since the connector is an industry

standard pinout, choices are varied and flexible. Many 3rd party vendors offer

products using this standardized power connector.

•  Pin 1: -
•  Pin 4: +
•  Pins 2 and 3: not used

Caution!

Ki Pro GO has no user-serviceable parts. To remove power from the

unit, remove the 4-pin XLR power connector to ensure disconnection. Refer all

servicing to qualified service personnel. Servicing is required when the device

has been damaged in any way, such as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the device, the device has been

exposed to rain or moisture, does not operate normally, or has been dropped

«
...
13
14
15
16
17
...
»

Содержание Ki Pro GO


































































Отзывы:

Нет отзывов