AJA Ki Pro GO Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 65

AJA Ki Pro GO Скачать руководство пользователя страница 10

Ki Pro GO File Based Recorder/Player v1.0 10 www.aja.com

• Green - Valid media has been inserted and is not currently being used for

recording or playback. Media in that port should be safe to remove.

• Green Flashing - Media is mounted and playing back a clip. The media itself is

probably safe to remove (no data loss will result), but removing the media will

cause a playback error.

• Amber Flashing - Media is mounted and recording. Media should not be

removed, as it will interrupt the recording.

Caution!

Failure to properly mount or dismount media, or an unexpected loss of

power while recording, can result in an unrecoverable data loss.

High Resolution LCD Display

The front panel LCD display shows a quad split display of all four Ki Pro GO

recording and playback channels. Various overlays are available for configuration

menus and other information, accessed with the buttons on the right. Menu

navigation and selection is accomplished with the User Control Knob.

DISP Button

Use the DISP button to toggle video overlay display modes. Sequential presses of

the button cycles through the display modes:
1.  No overlay – display is video monitor only
2.  Top and bottom status overlay
3.  Top and bottom status overlay plus VU meters
4.  Top, bottom, VU meters, and the last displayed status or configuration

screen. That operating mode (Status, CONFIG or Media) will also

automatically be selected, and that mode's front panel button will be

highlighted.

User Control Knob

The User Control Knob on the right side of the Ki Pro GO front panel can be used

to scroll through and select menu items. After scrolling to and high-lighting a

menu item of interest, push the knob to select. To cancel a selected menu item,

rotate the knob to highlight EXIT and push the knob in to return to the top level.

Figure 2. Ki Pro GO User Control Knob

User

Control

Knob

When an active configuration menu is displayed, pressing and holding the knob

will restore that menu's factory default setting.

«
...
8
9
10
11
12
...
»

Содержание Ki Pro GO


































































Отзывы:

Нет отзывов