10 GigE IP Mini-Converters SMPTE 2110 IP Transmit/Receive v2.2r1 60 www.aja.com
IPT-10G2-HDMI Tech Specs
Video Formats
• (HD) 1920x1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
• (HD) 1920x1080i 50, 59.94
• (HD) 1280x720p 50, 59.94, 60
• (SD) 625i 50
• (SD) 525i 59.94
Video Quality
• 10-bit, 4:2:2, uncompressed
Media Transport Interfaces
• SMPTE ST 2110 (-10, -20, -21, -30)
• 2x SFP+ Cages - SFPs not included
• Recommended 10 GigE SFP+ modules:
• Arista Networks SFP-10G-SR Compatible 10GBASE-SR
• Fiberstore SFP-10GSR-85 10G SFP+ 850nm
• Finisar FTLX1471D3BCL (for single mode 1310nm)
• Mellanox MFM1T02A-SR 850nm 10G
NOTE: Maximum supported SFP+ power is 500 mW per SFP+ cage
Video Input Digital
• 1x HDMI Standard Type A connector
• HDMI v1.4b 24/30-bits per pixel
• Up to 1080 60p, 4:2:2, 10-bit, YCbCr/RGB
Audio Input Digital
• Up to 8-Channel, HDMI embedded audio, 24-bit per channel, 48 kHz
synchronous
Audio Input Analog
• 2x RCA analog audio
• Levels at -10 dBu (nominal)
Video Output IP
• SMPTE ST 2110
• Single video channel output
• SMPTE ST 2022-7 dual stream output for hitless switching
• Tx support for Narrow, Gapped Mode
Audio Output IP
• SMPTE ST 2110
• Up to 8 channels audio, 24-bit per channel, 48 kHz synchronous
• 1 ms or 125 µs packet interval
• SMPTE ST 2022-7 dual stream input for hitless switching
Reference
• 1x BNC
• Reference Out connector generates an analog/tri-level reference output
synchronized to the PTP clock