Io X3 Capture, Display, Convert v16.2 10 www.aja.com
Balanced Analog Audio Input and Output
A 25-pin connector provides 8-channel balanced analog audio, 24-bit 48kHz
sample rate D/A and A/D. This will require an industry standard 8x XLR on DB-25
breakout cable (not supplied). The eight analog audio channels can be configured
four different ways:
• Ch 1-8 Output
• Ch 1-4 Input and Ch 5-8 Output (default)
• Ch 1-4 Output and Ch 5-8 Input
• Ch 1-8 Input
12V Power Connector
A standard 4-pin XLR type connector is provided for either battery or line source
power using the supplied AC power adapter.
Installing Software
NOTE: If your computer has previously had another video capture or multimedia device
installed, ensure you uninstall any related software before installing Io X3. This
will prevent any hardware or software conflicts.
Before installing the software package, ensure that your capture/editing
application is installed as detailed in its user documentation. Before using Io X3
an NLE application, it is best practice to have installed and run the software at
least once on your workstation. Next, install the AJA software package.
If at a later date you add any Io X3 supported applications that require drivers,
you must run the AJA install program again to install them.
macOS Installations
macOS High Sierra (10.13), macOS Mojave (10.14), macOS Catalina (10.15), macOS
Big Sur (11.x) and macOS Monterey (12.x) all have security requirements that may
present dialogs during installation. Please refer to the Release Notes for guidance.
