AJA Io IP Скачать руководство пользователя страница 46

Страница: 46 / 86

Io IP Transport, Capture, Display v16.2r1 46 www.aja.com

Enable Checkbox

The ‘Enable’ checkbox connects the Io IP to the network address specified by all

the matched output parameters. Any time a parameter is changed, the output

should be re-enabled.

DS Keyer Screen

Io IP has a hardware-based downstream keyer that is ideal for putting logos,

“bugs” or other video material with an alpha channel on top of video being

played out or printed to tape. A typical application would be putting a television

station’s call letters or channel over program video content. Keyed video can

be from the Io IP’s internal Frame Buffer (from storage, Video In, etc.) or from a

graphics file that has an alpha channel (PhotoShop etc.).
Settings in the DS Keyer Screen provide control over how the keyer operates and

whether it’s turned on or off.

Downstream Keyer

Mode

• Downstream Keyer Off - When this pulldown menu item is selected the

downstream keyer will be turned off.

• Frame Buffer over Matte - Places the keyed video with alpha channel currently

in the Frame Buffer over a fixed color matte determined by the “Matte Color”

setting set separately.

• Frame Buffer over Video In - Places the keyed video currently in the Frame

Buffer over the video input for playout or print-to-tape.

• Graphic over Matte - Places a graphics file having an alpha channel (chosen in

“Graphic File” pulldown) over a fixed color matte determined by the “Matte

Color” setting set separately.

• Graphic over Video In - Places a graphics file having an alpha channel (chosen

in “Graphic File” pulldown) over the video input for playout or print-to-tape.

Содержание Io IP























































































Результаты поиска

Содержание Io IP

Отзывы:

Похожие инструкции для Io IP

Бренды по названию

Популярные бренды

AJA Io IP, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Io IP

Отзывы:

Похожие инструкции для Io IP

Бренды по названию

Популярные бренды