Io IP Transport, Capture, Display v16.2r1 45 www.aja.com
IP Output Screen
The IP Output Screen on Io IP lets you define parameters for sending outputs
from the Io IP onto the network. This screen has two tabs, one for each Channel.
NOTE: The IP 1 Input and IP 2 Input labels do not represent the physical SFP cages on the
Io IP. They represent different transmissions being received by the Io IP, possibly
over the same 10GbE link.
Channel 1 or 2
Select the output channel to be configured.
Destination IP Addr
This parameter lets you specify the network address where a multicast from this
Io IP can be sent for use by other devices on the network.
Destination Port
This lets you specify the port number being used to send a multicast to the
Destination IP address specified above.
Destination IP Addr 2
This field will only be available when 2022-7 is Enabled in the IP Network section.
This filter lets you specify the network address where a duplicate multicast from
this Io IP output can be sent. This IP output will then be sent to both the address
specified in ‘Remote IP Addr’, and to the address specified in ‘Remote IP Addr 2’.
Destination Port 2
This field will only be available when 2022-7. It lets you specify the port number
being used to send a multicast to the ‘Remote IP Addr 2’ address specified above.
