Io IP Transport, Capture, Display v16.2r1 42 www.aja.com
Subnet Mask
This is the subnet mask defined by the system administrator. Generally speaking,
this value must be defined in the AJA Control Panel for Io IP to work correctly on
the network.
Gateway Address
This is the IP address of a network gateway to a remote network. This value must
be defined if/when the Io IP needs to send signals to, or receive signals from a
remote network.
Local MAC Address
This is an information display field that cannot be changed. It is the MAC address
that is assigned to the specific SFP cage on the Io IP.
Set Button
Click the ‘Set’ button to apply the changes.
IP Network Screen, 2022-7 Operation
Enabling 2022-7 makes it possible to configure redundant networking capabilities
using both SFP modules. No additional inputs or outputs are activated. In 2022-7
operation each SFP transmits and receives the same information. This allows the
use of two separate network paths, making recovery possible if one path fails.
When 2022-7 is enabled, additional settings are available for configuring your
network settings.
• SFP Top - Indicates the top physical SFP cage on the Io IP board, farthest from
the copper contacts where the Io IP connects to its PCIe slot.
• SFP Bottom - Indicates the bottom physical SFP cage on the Io IP board closest
to the copper contacts where the Io IP connects to its PCIe slot.
