Io IP Transport, Capture, Display v16.2r1 24 www.aja.com
NOTE: Clicking on the AJA Control Panel "Erase All Prefs" button deletes the existing
Local Preference file from this location. This file will be recreated as soon as any
Control Panel setting is changed.
NOTE: Clicking on the AJA Control Panel "Reset Device..." button will delete the existing
Local Preference file. If a Global Preference file is found, these settings are
reloaded. If a Global Preference file is not found, “factory defaults” are loaded and
the device is set to that state
Global Preference
An administrator can establish a house standard for an AJA device by copying
a preference file to a shared computer location. Once placed at that location, it
becomes a Global Preference file where it will establish a standard default startup
state for all users of that AJA device using that computer system. These settings
preempt the initial AJA factory default settings, and are applied when an AJA
device is first powered up, or when the Control Panel
Reset Device
button is
pressed.
To establish a Global Preference, the administrator first configures the AJA device
(which automatically creates a "com.aja.devicesettings" Local Preference file in
the location identified above) and then copy or move or that file to the correct
computer locations (manually or by pushing it out across the network) on all the
computers that use the AJA device.
NOTE: If the user makes changes to an AJA Device's Control Panel settings, those
changes are saved to the Local Preference file, which will take priority over the
Global Preference file.
The shared computer locations for a Global Preference file are:
On Mac:
• From the Finder, click on Go/Computer/<System HD>/Users/Shared/AJA/
and copy or move the "com.aja.devicesettings file" described above to this
location.
NOTE: The "AJA" folder needs to be created manually at this location before moving the
preference file into it.
On Windows there are three possible shared locations depending on your system:
• C:\Users\Public\Aja\
• C:\Users\All Users\Aja\
• C:\ProgramData\Aja
Copy or move the "com.aja.devicesettings file" described above to one of
these locations.
NOTE: The AJA Control Panel Info screen displays the path to the Global Preference file
on that computer.
NOTE: Clicking on the AJA Control Panel Erase All Prefs button does NOT delete an
existing Global Preference file from this location.
Io IP Audio Monitoring
Io IP hardware can be used as your single audio monitoring solution whether
you are auditioning music in a web browser, playing a movie file on the desktop,
creating music, or playing a YouTube clip. As long as the output of your work
or application is normally output via the host system audio, your AJA hardware
can route this audio for monitoring. This cuts down on unnecessary cabling, and
means you can take advantage of a consistent audio monitoring environment
whatever you are currently doing with your host system.
