HA5-Fiber HDMI to 3G-SDI over Fiber v1.2 15 www.aja.com
Input Select
Choose what audio channels are routed to the SDI output.
• HDMI - Only the audio channels from the HDMI input are embedded.
• Analog - Only the two analog input channels are embedded. You can choose
which of the embedded SDI channels will receive the analog audio, using
the Analog Out Map and Channel Select settings. The other channels will be
muted.
• HDMI - Both the analog inputs and HDMI audio are embedded. You
can choose which of the HDMI channels will be replaced by the two analog
audio inputs, using the Analog Out Map and Channel Select settings.
• None - No audio will be embedded. All channels are muted.
HDMI Conversion
Choose the audio conversion to be performed on the incoming HDMI audio.
• Convert Rate - The HDMI audio will be converted, if necessary, to 24-bit/48
KHz audio.
• Pass Through - The HDMI audio will be passed to the SDI embedded audio
channels without conversion.
Analog Out Map
Permits selecting the pair of SDI embedded audio channels that will receive the
analog audio from the RCA connectors. The audio pair replaced depends on
the Channel Select setting below, and your choice of Ch 1-2 through Ch 7-8 that
correspond to that set of embedded channels.
Channel Select
Choose which set of 8 channels (4 pairs) of embedded audio the SDI output will
carry. Select Channels 1-8 or Channels 9-16.
