HA5-Fiber HDMI to 3G-SDI over Fiber v1.2 12 www.aja.com
EDID Tab Screen
EDID (Extended Display Identification Data) is used to find the highest signal
resolution that is compatible with both the source and the destination. When an
HDMI source device is initially connected to the HA5-Fiber, the HA5-Fiber will
communicate with the signal source about what formats the HA5-Fiber supports.
The HA5-Fiber and the signal source will negotiate the best mutually compatible
signal resolution.
Preferred Video Format
The HA5-Fiber's default EDID selection is 1920x1080p60, but it can be configured
by the user to any of the following formats and frame rates:
•
Auto
•
1280x720p50
•
1280x720p60
•
1920x1080i25
•
1920x1080i30
•
1920x1080p50
•
1920x1080p60
YCbCr Support
This parameter determines whether the HA5-Fiber will signal to its HDMI source
that the HA5-Fiber will support (Yes) or will not support (No) YCbCr input formats.
NOTE: RGB formats are always supported by default in an HDMI sink.
