manualshive.com logo in svg

AJA FS2, Инструкция по установке и эксплуатации, Страница: 75 / 120

Поделиться
Скачать
AJA FS2 Скачать руководство пользователя страница 75

FS2 Frame Synchronizer/Converter v3.0 75 www.aja.com

 

Test Pattern

This parameter selects the video source for the Test Pattern Generator. The 

pattern generator is turned off and on using Output parameter 3 Video Output 

mode.

21 Test Pattern Video

75% Bars (default)

Ramp

Multiburst

Flat Field

Black

100% Bars

Sets the test pattern to 75% bars.

Sets the test pattern to ramp.

Sets the test pattern to multiburst.

Sets the test pattern to flat field chroma.

Sets the test pattern to black.

Sets the test pattern to 100% bars.

Freeze

This parameter tells the FS2 to freeze the current video frame on all outputs. This 

may be useful either for testing or in case of loss of the input source.

22 Freeze Output

Off (default)

On

Normal operation. The FS2 outputs video from the input.

The FS2 captures and freezes the most current video frame and 

displays it on the outputs as long as this parameter is set to On.

The freeze feature can be controlled not only by the front-panel and web 

browser interface, but also by a GPI input. When a GPI input is causing the freeze 

condition, the EXT lamp will be lit on the front-panel. 

AUDIO 1 and AUDIO 2 Menu Groups

The Audio Menus control the FS2’s audio routing and signal processing. Because 

the selections for the video processors are identical, both are described here. 

1.0 Audio Input

This parameter performs input audio source selection for Audio Processor 1. 

Multiple input sources may be present at all the connectors on the FS2 rear panel, 

but the active input source routed through the FS2 is the one selected here. 

AES/EBU (default

Selects the AES/EBU digital audio input (16-ch) as the input source.

Analog

Selects the Analog audio connector (DB25, 8-ch) as the input 

source. Input channels 9-16 are set to Mute.

Embed SDI1

Uses the embedded audio from the SDI 1 video input as the input 

source.

Embed SDI2

Uses the embedded audio from the SDI 2 video input as the input 

source.

Embed Fiber1

Uses the embedded audio from the optional Fiber 1 video input as 

the input source.

Embed Fiber2

Uses the embedded audio from the optional Fiber 2 video input as 

the input source.

HDMI

Uses the embedded audio from the HDMI video input (8-ch) as the 

input source. Input channels 9-16 are set to Mute.

Содержание FS2

























































































































Отзывы:

Нет отзывов